Boot and operation process

It is recommended to connect to the wired network to get the latest program

1. First boot

2. Connect the Internet router and the DC power cord to see the power indicator light up (picture)

3. Wait 1~2 minutes for the system to fully boot up and execute the program automatically (picture)

4. Start the program to see the oled display data (picture)

Use wired network mode:

1. Connect to the Ethernet cable

2. Connect the DC power supply line

3. Wait for the power on and the screen display

Use wireless network mode:

1. Connect the DC power supply line

2. Wait for the device to turn on and the screen display

3. Refer to installation method and set up wireless network